Tag Archives: camera

Seagull 120 TLR – Introduction

[If you like this blog, please take a few seconds to take a look of the ads at the end of the post. Thank you. TLRgraphy will continuously collect the best information about twin-lens reflex cameras]

 

Introduction

Seagull WWSC 120

I’ve been thinking about getting into medium format for a long time. I’ve owned 35mm Canon cameras for about twenty years, and a Calumet Cadetfor almost two, and I’m pleased with the results I get from both. The grain-free enlargements from 4×5 originals are great, and the convenience of autofocus 35mm cameras is really nice, but I kept longing for larger negatives than 35mm without the hassle of 4×5. Enter medium format.

After a few days of researching the subject, I found a few alternatives to$20,000 Rolleis and decided to try Calumet’s $120 offering: the Seagul WWSC 120 TLR.

Easy enough to use

These days, unpacking and using an autofocus 35mm camera for the first time can be daunting, even with entry-level bodies. The array of features is immense, and the manuals are often lacking. In contrast, the Seagull is Just Plain Simple:

  • Open the camera, load film, close the camera
  • Uncover the lens, unfold the viewfinder hood, compose, focus
  • Adjust shutter speed, lens aperture
  • Shoot, advance film

Lather, rinse, repeat.

Loading the film

There’s a rotating knob on the bottom of the camera, the exercise is to rotate it to the “O”pen position, and then opening the body. Load the film on the bottom, thread it, insert the leader in the take-up spool, remove the slack and advance it with the wind-up crank until the arrows on the paper backing align with the markings on the body. Close the camera. No surprises here.

Composing and focusing

The viewscreen is fairly bright, and there’s a built-in focusing loupe you can pop-up and help you focus. There’s also a split-prism focusing aid in the center of the screen.

Using a waist-level finder was a new experience for me. I got used to it fairly quickly, though I did have some surprise elements creep into the slide that I did not see while composing the shot. This is because of parallax: the viewing lens is slightly higher than the taking lens. With practice, however, you can learn to correct for this limitation. You can use an eye-level finder after focusing, basically, you put down the front side of the hood, and look through a square opening on the rear side of the hood. The focusing knob is well dampened, and it has the very useful DOF markings.

Taking the picture

The shutter goes from 1 second to 1/350, plus B, and since it’s a leaf shutter, sync is achieved at all speeds. There’s a self-timer, and you can screw-in a standard cable release. Neat feature: multiple exposures of the same frame are possible.

The camera does not have a built-in light meter. I’ve been using my Minolta Spotmeter F, and I shot a few frames following the Sunny/16 rule.

There’s a hot shoe on the side, above the focusing knob, and a PC connector on the front.

Unloading the film

Once you shot the last frame (you get twelve), you just keep on turning the crank until you hear the rollfilm leave the original spool. Crank a few more times, to be on the safe side, and open the camera. Moisten the paper leader, attach it to the roll, and pull the roll off the camera. Then take it or send it to one of the labsrecommended elsewhere in this website, or your favorite pro-lab.

Sharp lens, too bad the vignetting

I hope some day to have some sample scans online, meanwhile, you’ll have to take my word for it: the lens suffers from severe vignetting from f3.5 to f5.6, and moderate from f8.0 on. It’s tolerable, particularly with print film, past f16. However, I found the lens to be sharpest at f11, so if you like shooting slide film, you’ll have problems if your subject matter includes a lot of uniformly lit surfaces near the edges (say, the sky on a landscape).

Film choices

The camera only accepts 120 format film, contrary to what’s stated in the 1998 “Essentials” catalog from Calumet, which says it’ll take both 120 and 220. The number of available emulsions is higher in 120 format, but some people like having 24 exposures per roll.

Summary: a good value

If you’re looking for a new camera to get started in medium format, the Seagull WWSC is a great value, at around $100 or so. I’m not aware of cheaper MF cameras (I know about Holgas, but my definition of “camera” includes the term “light-tight box”…).

via Seagull 120 TLR – photo.net.

Rolleiflex & Rolleicord White Face

The “White Facecameras were a special issue camera. There are only 5 models in total: 
The Rolleiflex T, Type 3, Rolleiflex 3.5F Type 5. The Rolleiflex 2.8F Type 4. The Rolleicord Vb Type 3. And the Tele-Rolleiflex. 
 
I am often asked “what is a White Face?” To the left you will see a picture of the White Face from a Rolleicord Vb. Below it you will see the face of a non-white face camera. In fact, the face is SILVER not white, but they have been aptly nicknamed “White Face.” All of the White Face cameras have this kind of face. Compare it with any other Rolleiflex or Rolleicord camera and you will see the difference. 
The Classic Rolleicord Vb Type 3. “White Face” K3Fb
Production Serial Numbers: 2.666.000-2.677.498.
Camera # Vb 2675054.
Lens: f3.5 Schneider Xenar # 12 112 538.
Shutter: Deckel Synchro-Compur 1-1/500 & B.
Filter Size: Bayonet 1.
This was a special edition camera. A new front lens panel was produced, which was nicknames “White Face.” It had the new company name of “Rollei-Werke Franke & Heidecke” below the taking lens with the letters Vb and the camera serial number.  Only 11,498 were produced. Camera had a new type of course grained black leather. 12-16-24 capability on 120 film with the use of masks. 
This camera does NOT take 220 film. 
The Classic Rolleiflex T Type 4
“White Face” K8T3
Production Serial Numbers: 2.314.000-2.320.298.
Camera # T2317719.
Lens: f3.5 Zeiss Tessar # 11 856693.
Shutter: Deckel Synchro-Compur X 1-1/500 & B.
Filter Size: Bayonet .
Special face plate with Rollei-Werke Franke & Heideke followed by T and serial number underneath takig lens. 
Camera had thicker black leather with large grain. From serial number 2.315.800, this camera was available with a Schneider Xenar lens. 
The Classic Rolleiflex 3.5F Type 5
“White Face” K4F/2
Production Serial Numbers: 2.845.000-2.857.149 and
3.555.000-3.559.999.
Camera # 3.5F 2856520.
Lens: f3.5 Schneider Xenotar # 12449750.
Shutter: Deckel ynchro-Compur MXV. 1-1/500 & B.
Filter Size: Bayonet 2.
This camera has the 120/220 option which permits 24 exposures on 120 film.  It also has the built-in meter. Camera number is located beneath taking lens. and has the company name, “Rollei-Werke Franke & Heideke” 
There are six variations of this camera including lens change: Planar or Xenotar, and the 120/200 option plus name change.
The Classic Rolleiflex 2.8F Type 4
“White Face” K7F4
Production Serial Numbers: 2.900.000-2.959.999.
Camera # 2.8f 2952526.
Lens: f2.8 Schneider Xenotar # 12 109506.
Shutter: Deckel Synchro-Compur MXV. 1-1/500 & B.
Filter Size: Bayonet 3.
This model, in the 2,9XXX range, was only available with the Xenotar lens.  Black leather with coarse grain. Built-in exposure meter.  Camera available with or without 120/220 option.  Camea serial number is located below the taking lens and is preceded by the letters 2.8F . The company name, Rollei-Werke Franke & Heidek is also below the taking lens.
This camera was also made in the 2,4XXX range and had the Planar lens witn or without the 12/24 option.  
The Classic Rolleiflex 2.8F Type 2
“White Face” K7F2 with 12/24
Production Serial Numbers: 2.451.851-2.479.999.
Camera # 2.8f 2,476.704
Lens: Carl Zeiss Planar 
Shutter: Synchro-Compur MXV. 1-1/500 & B.
Filter Size: Bayonet 3.
This model was produced with the Planar lens.
Black leather with coarse grain. Built-in exposure meter.  Camera available with or without 120/220 option.  Camera serial number is located below the taking lens and is preceded by the letters 2.8F . The company name, Rollei-Werke Franke & Heidek is also below the taking lens.
The Classic Rolleiflex 2.8F Type 2
“White Face” K7F2
Production Serial Numbers: 2.451.851-2.479.999.
Camera # 2.8f 2,477,589.
Lens: Carl Zeiss Planar #5389264
Shutter: Synchro-Compur MXV. 1-1/500 & B.
Filter Size: Bayonet 3.
This model was produced with the Planar lens.  Black leather with coarse grain. Built-in exposure meter.  Camera available with or without 120/220 option.  Camera serial number is located below the taking lens and is preceded by the letters 2.8F . The company name, Rollei-Werke Franke & Heidek is also below the taking lens.
Rolleiflex 3.5F Type K7F/2
White face-12/24- Very Late Edition
Production Serial Numbers: 3,555.000-3,559.999
Camera #3.5F. 3,556,071.
Lens: Zeiss Planar # 2050185 (NEW)
Viewing lens: Heidosmat # 5129336 (NEW).
Filter Size: Bayonet 2 
There is some confusion on the model number for this camera. Prochnow says Type 3. Evans and Parker both say Type 5.
This camera has the 120/220 option which permits 24 exposures on 120 film.  It also has the built-in meter. Camera number is located beneath taking lens. and has the company name, “Rollei-Werke Franke & Heideke” 
There are six variations of this camera including lens change: Planar or Xenotar, and the 120/220 option plus name change

[If you like this blog, please take a few seconds to take a look of the ads at the end of the post. Thank you. TLRgraphy will continuously collect the best information about twin-lens reflex cameras]