Advertisements

Tag Archives: autocord

Minolta Autocord RG, 3rd Version

Minolta Autocord RG, 3rd Version – YouTube.

Vanishing Railroad
Advertisements

The AutoCord Pool

 

 

SE 10th

via Flickr: The AutoCord Pool.

Dont miss a screw :)

view profile

mirnuj_atom says:

Hi
A’ve got a Minolta Autocord (without light meter) which has a leak problem, it looks like this:

cs411016.userapi.com/v411016386/1d2c/nGzFR802jBc.jpg

cs411016.userapi.com/v411016386/1d0a/08mvY_vCYV0.jpg

cs411016.userapi.com/v411016386/1d01/pdI3-8teUDM.jpg

cs302406.userapi.com/v302406386/2752/aiaZRwnccvs.jpg

First I thought that was a problem with seal so I replaced that, nothing changed. Then I replaced seal once again and pasted over clefts with black, non transparent tape, nothing changed again 😦

Now I don’t know where might that leak come from,

Thank you for any suggestions.
Posted at 10:32AM, 7 August 2012 PDT (permalink)

view photostream

Burnt Umber  Pro User  says:

I think it is a shutter issue.
Posted 2 weeks ago. (permalink)

view photostream

ddandan  Pro User  says:

Any chance that the focus scale on front is missing a screw on one side or the other?
Posted 2 weeks ago. (permalink)

view photostream

ddandan  Pro User  says:

, your links don’t register as actual links. I cut and pasted one, but that’s all I’ll do.

Check for any other missing screws. Spool knobs, focus hood. Check the feet for bending and cracks.

Important question with any light leak- does the effect stop at the edge of the image frame, or is it also in non-image areas? This tells if thel ight is coming from the front of the light box- shutter, lens board, etc.- or if it is from elsewhere.

Also open the back and put the film against the opening as if it was being exposed. See where the leak falls inside the camera. Including at the upper or lower film spool area- most often film gets fogged before or after it is in the gate for exposure. From what I remember of oyur shot (nope, not cutting and pasting again) it had the look of a film spool being the cut-off for the lower part.
Posted 2 weeks ago. (permalink)

view photostream

keltic_tom  Pro User  says:

Stop the guessing and take the camera to a Pro!
Posted 2 weeks ago. (permalink)

view photostream

hamhankjohn  Pro User  says:

From the squarish shape in the middle of the frame, and the position of the bright spot, my guess is it’s the bottom spool release knob or close to it. Does it show up on the last frame?
Posted 2 weeks ago. (permalink)

view photostream

mirnuj_atom says:

Ddandan is right there is a missing screw on the front, it took 5 films to figure out 😦

Thank you very much!!

I will shot another film today to verify.
Posted 2 weeks ago. (permalink)

view photostream

ddandan  Pro User  says:

About right, five rolls. I think it took me four to figure it out when it happened to me? I had simply not re-installed the plate after doing some work on the camera. Drove me crazy. Tried new seals, taping the outside of the back in different areas, etc.
Posted 2 weeks ago. (permalink)

view photostream

WB Lynch says:

Great news.

I need to remember this for future reference.
Posted 2 weeks ago. (permalink)

view photostream

ddandan  Pro User  says:

There are many holes in TLR bodies that were drilled all the way through. These provide easy access to light if the screws are removed. You can see the holes inside the film chamber, etc. In the mirror box are other holes that come through.

For manufacturing, this makes sense. Drilling all the way through is quick, allows the chips from tapping to be blown out easily, etc.
Originally posted 2 weeks ago. (permalink)
ddandan edited this topic 2 weeks ago. 

view photostream

mirnuj_atom says:

Everything is OK now, I am happy.

What I did to find the leak:
I took a few LEDs from my bike lights, wired them with little bataries, put everything into the camera and checked in dark room to find if I can see some lite.
Posted 2 weeks ago. (permalink