But is coming off the front plate and twin-lens reflex Kapa~tsu peels the skin of ordinary table, removing a few screws, this is a little different.

They can get the cover is only eight of the letter.

I opened the shutter anyway.

Only this part is coming off. In order to remove the front plate there is a need to remove the shutter.

• Wait and see and lubricate all moving parts of the shutter.Although there is no inconvenience has occurred so far, and Choi worry.
• Bad feeling are likely to need to open the head section.
• Thorough restoration of the shutter.

• Repair bete noire of the twin-lens reflex is that they peel off the outside leather. Had been replaced with synthetic leather firm this individual been removed once already.

• I opened a very clean. Accuracy of the parts is much better compared to the flex Aires. I fall a little compared with the Rolleiflex.
• This large image here in the.

Symptoms were reproduced Fortunately turn off the shutter and have persistently put a dummy film. It is trapped in here there is a slight dent in this part of the arrow of the cam.

• Revealed after polishing by hand and see a different angle.
• Formatted with a diamond file, was finished in the compound.

Got a junk auto code of one another. There is not enough trouble stroke of the shutter charge.

• Ring is listed in this order from left to right. For the charge for the shutter lock, second from left is the rightmost.
• Correct behavior is OK with pliers.
• This trouble was encountered in the auto code then the number of units.
• It may be that there is a screw to adjust the stroke at the side version, has been cleared by covering the pipe outer diameter of 3.5mm brass lever on the shutter.

• Helicoid structure is exactly the same as let flexors.
• Meopta web site of 1948 was the launch of the flexors Let II and see. On the other hand, the design of the Minolta staff may have been referring to the flexors let to think that it was released Autocord MXS is the first of 1955.

Auto code Mushiritora the hull. Broken up and crispy when the material of the skin peel off the synthesis of this era is not well.

• Caused the pattern to scan Hagase so miraculously well.Let’s print out and use it because the two gray scale GIF images.
  • Front
  • Winding surface
  • Top
• I I need to be a decent PDF files in Illustrator to trace someone (mode justification by faith)
• Please forest was to trace and if you write the @ sama Osaka. Thank you. Please use the How to come here.For the top must match the actual products. PDF file Kawaha auto code
• Be a bit short up and down Why do not you print the PDF file. (300dpi) image scan of the actual source of information

• .

Affixed to the print cut synthetic leather.

• Let me patrol the 100-yen shop, so put some good material and variety.
• This is finished using the binders of the 100 yen shop.

Leather paste this might be more